i have the big tv romote from brookstone but i lost the instrutions. can anyone tell me how to program it
5 Answers
Manual Programming
1. Turn on the device with which you want to use the remote control.
2. Locate a 3-digit code for your device.
3. Press POWER button on remote and hold the corresponding button on the remote control (TV, VCR, SAT, DVD) for approximately three seconds. The POWER INDICATOR illuminates.
4. Enter the 3-digit code for your device within 30 seconds. The POWER INDICATOR shuts off.
5. Press to verify correct code entry. If the device shuts off, the code was entered correctly. If the device does not shut off, repeat steps 3-4, using a different code.
Automatic Programming
1. Turn off the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control (TV, VCR, SAT, DVD) until POWER INDICATOR illuminates. The remote control is in programming mode.
3. Press POWER button on remote and release . The POWER INDICATOR flashes once and stays on indicating the unit is in Power scan mode.
4. Press CHANNEL+ or CHANNEL- repeatedly until the device turns on.
5. When the device turns on, press ok to store the code.
Note:
To exit without storing the code, press BACK.
The unit will search for the nextcode or the previous code if you press
CHANNEL+ or CHANNEL- after the device turns on.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.
Big Button Remote Codes
This program is just a farce, it amazes me what people will do just to go on TV and humiliate themselves to try an win some money. Why do we have to have reality TV when it is know where near normality.
The truth is that there are normal women out there, but apparantly we don’t make for good tv. So it looks like for the forseeable future there will only be slappers and so on on tv.
I need to figure out the 3 digit code. I have no info on the remote.