4 Answers
Do a code search. Like this:
– Turn on the TV manually.
– Move slider switch at the top of the Remote to the “TV” position.
– Press and hold down the “Mute” and “Select” Buttons until the green light (above the “TV” position on the slider switch) blinks twice.
– Enter 9 9 1
– Enter 1
– Push “Power” Button (below slider switch).
– Point the Remote at the TV and repeatedly push the CH + Button until the TV turns off. Note: Go slow. If you go too fast and don’t notice the TV has turned off until you have gone by the code you may have to start over.
– Once the TV goes off, press the “Select” Button to lock in the code.
Good Luck. This process can sometimes take a while! Be patient.
Hope this helps,
Charles
Digital Labs Tv
Yes I agree with the above
Would be interested to know more on this too